You are here: Home > Heat Exchangers/Driers
Sort By:
Page of 2  
Dryer
 

Product Code: 7559s

Ipso 20ft container dryer.  Electric with a 182 Barry fan and two drying racks. Used for R & D work for plastic, pulp, previously seaweed, deer velvet and fruit.

Size:  1.8m x 1.45m x 4.55m internal.

Offsite
Heat Exchanger
 

Product Code: 7924s

Spiraflow single tube.  Price in AUD$, ex site Australia and does not include packaging, freight, insurance etc.

Size:  100mm diam x 3m long, 50mm ports.

Centre in photo

Offsite
Spray Drier - Lab Size
 

Product Code: 7927s

Bowen Eng, USA.  Manufactured in 316 stainless steel.  Conical, gas heated, rotary atomiser, 2hp 415v fan, cyclone and collection bin.  Price in AUD$, ex site Australia and does not include packaging, freight, insurance etc.

Size:  Diam 30".  Evaporation rate to 15 to 80lbs/ hr.  Temp to 500 degrees C.

Offsite
Spray Drier - Pilot
 

Product Code: 7930s

Niro, small.  Price in AUD$, ex site Australia and does not include packaging, freight, insurance etc.

Size:  Evaporation rate 5 to 15kg/hr.

Offsite
Fluid Bed Drier
 

Product Code: 7475i

Glatt type WSG30, Fab. No. 1952, U/min 3000, Kcal/Kw 390, pneumatic lift/lower of bowl. Previously used to process animal health product and granulate high tech supplement in up to 30kg batches. Particle size from 50 to 300 microns, average 225 microns. This size can be controlled by parameter settings.

Size:  Bowl top diam 700mm, bottom diam 490mm, side height 340mm. Chamber height 1.25m, diam 720mm.

Special Price:  NZ$2,500.00+GST

Onsite
Evaporator
 

Product Code: 8492s

Thin film, falling film type.  Jacketed, cylindrical, with internal rotor, for vacuum application.  Jacket can be heated by steam or hot water.  Fabricated 1988, ex Norway.

Size:  O'all length approx 6.19m x cylinder OD 708mm.

Offsite
Heat Exchanger
 

Product Code: 8600s

McEwans Dom Kolding DDMM-DPE4125 with 20 plates, 3" RJT connections.

Size:  Plates 1.2m x 360mm.  O'all 450mm W x 600mm x 1.65m H.

Offsite
Heat Exchanger
 

Product Code: 8701s

Crepaco Rota Pro swept surface, serial C9155, YOM 1982.

Offsite
Dryer
 

Product Code: 8728s

Stehnning.  Designed for a max temp of 120 degrees C for only drying food parts.  The rotary joint and bearings are also designed for this application.  Max loading capacity referring to flakes at approximately 0.4kg/L, is 1680kg.  The unit uses steam to generate hot oil - complete with vacuum system and oil heater.  Previously used for drying chicken meat.  Price in AUD, ex site Australia, and does not include packaging, freight, insurance etc.

Size:  6cu.m

Offsite
Heat Exchanger
 

Product Code: 8818s

Spiroflow, mono tube.  There are 4 sections but the interconnect pipework is missing.  Previously used for meats and solids.  Price in AUD, ex site Australia - packaging, freight, insurance not included.

Size:  4 sections at 3m long x 75mm diam.

Offsite