You are here: Home > Mixing & Blending
Sort By:
Page of 5  
V Cone Blender
 

Product Code: 8221s

Stainless steel, mounted in frame, control box, manhole, bottom valve. Number of rotations is programmable.  Requires barrier or separate room with cut-off switch on door.

Size:  1 tonne depending on product density.

Offsite
Ribbon Blender
 

Product Code: 8233i

Mild steel, central slide valve, lidded, timer, motor (estimate 10hp).

Size:  Bowl: 1.8m L x 900mm W x 950mm deep.  O'all 2.75m L x 2.1m W x 1.9m H.

Onsite
Blender, Paddle
 

Product Code: 8283s

Stainless steel, horizontal, enclosed, top removable lid, scrape paddles.  Complete with 3 phase, 4kw motor and pump.

Size:  600L, drum diam 900mm x 1.1m L.

Offsite
Blender, Paddle
 

Product Code: 8284s

Stainless, open top.  Inclined with 60mm diam shaft and 0.37kw geared motor.  Set up for 5 elements but 1 has been cut away.

Size:  Internal 2.4m L x 400mm diam, ht 1400/850mm.

Offsite
Emulsifier/Blender
 

Product Code: 8290s

Technochemic, model 0-12ATU.  Multistage stainless steel pump (4 stage), 1/2" inlet coupled to electric motor.  Mobile, site glass.  Second 1 1/2" product inlet.  Product is combined and forced through 1 1/2" pipe to impact chamber (2 stage).  Gas is injected into first stage.

Size:  1 1/2" outlet.

Offsite
Mixer
 

Product Code: 8357s

Bosch (?), 3 speed, paddle and dough hook, stainless steel bowl.

Size:  Bowl diam 500mm x 500mm deep.

Offsite
Ribbon Blender
 

Product Code: 7591s

Crepaco.  Stainless steel, twin shafts/ribbons, 2x 10hp motors, pneumatic valve control, no electrical switchgear.  Has side outlet (opening on both ribbons at one end).

Size:  Bowl: 1850mm long x 1225 wide x 800 deep.

Offsite
Blender
 

Product Code: 7617i

A mill ("The Rapid Mill") is mounted over one end of a mild steel ribbon blender.  The blender discharges from a central outlet. Previously used for flour/baking mix.

Size:  Blender bowl 1.27m x 640mm W x 500mm deep.

Onsite
Ribbon Blender (New)
 

Product Code: 7669s

Iopak, model MIX500.  Fully s/s construction, double ribbon (contra flow) configuration, outrigger bearing/stuffing box seal arrangements at both shaft endings, 150mm dia pneumatically operated butterfly valve discharge, 150mm dia dust extraction port and substantial bar mesh guarding under a hitch up hinged lid arrangement.  Working dimensions 1250 x 620 x 760.  A 415V AC, three phase 5.5 kw gear motor (Worm wheel & Pinion) is direct coupled to the blender shaft. O'All dimensions 1970mm L x 1000mm W x 1060mm H.  Please note price excludes electrical and safety work.  Price (to confirm) in AUD$, ex site Australia.

Size:  500L

Offsite
Ribbon Blender (New)
 

Product Code: 7670s

Iopak, model MIX2000.  Fully s/s construction, double ribbon (contra flow), outrigger bearing/stuffing box seal arrangements at both shaft endings, 150mm dia pneumatically operated butterfly valve discharge, 150mm dia dust extraction port and substantial bar mesh guarding under a hitch up hinged lid arrangement.  Working dimensions 2450 x 800 x 1150mm.  A 415V AC, three phase 22kw, 22 (output) RPM gear motor (Worm wheel & Pinion) is direct coupled to the blender shaft.  O'All dimensions 3370mm L x 1200mm W x 1710mm H.  Please note the price excludes electrical and safety work.  Price in AUD$ ex site Australia.

Size:  2000L

Offsite