You are here: Home > Pumps/Valves
Sort By:
Page of 2  
Pump
 

Product Code: 8456s

P213 with base, no motor.

Offsite
Pump
 

Product Code: 8469s

Deep well type.

Offsite
Vacuum Pumps (2)
 

Product Code: 7974i

Busch type Panda WV2000.  Year 1990, low pressure, water ring.  This is attached, on a frame, to an high vacuum oil ring pump - Busch type 250-132, that will go down to a vacuum of 0.5m bar.  There is also a small stainless water receiver/recycle unit on the frame.

Size:  Capacity 2000m3/hour (Pump A)

Onsite
Vacuum Pumps
 

Product Code: 7983i

Robuschi - (Italy) type RMV23-CT.  PVR (Italy) type RP80AV-BP = 2020cu.m per hour.  Both mounted on one frame.

Onsite
Pumps (4)
 

Product Code: 8486s

High pressure, water.  2x with motors at $5,000+GST each.  2x without motors at $4,000+GST each.

Size:  5,000psi at 35g/min.

Offsite
Pump
 

Product Code: 8495i

Wilden.  Nitrile bellows, aluminium case.  Missing suction section.  Previously used for paint.

Onsite
Emulsifier/Pump
 

Product Code: 8888i

Stainless, on mobile frame, no screen.  15A plug with central pin, on/off and emergency stop/start.  Motor 5.5hp, 2840rpm.

Onsite
Pump
 

Product Code: 8880i

Mono, stainless, lobe, on mobile frame.  Three phase (with central pin).  Previously used for mouthwash.

Size:  Inlet/Outlet 35mm.

Onsite
Vacuum Pump
 

Product Code: 8906i

Mason & Porter, Masport Senior.  $Offers.

Size:  Motor 2hp, 1405rpm, 3 phase.

Onsite
Pump
 

Product Code: 8919i

Mono CP25.  Single phase, 0.5hp, 1430rpm, plastic contact parts.

Onsite